Covering textile - Eurobac : Technical range - Especially conceived to answer to particular requirements of technical applications and notably calculus centres, telephonic exchanges...

Especially conceived to answer to particular requirements of technical applications and notably calculus centres, telephonic exchanges...

The technique

DESCRIPTION

Composition
Nominal standard size 600 x 600 mm

A high density particled board of standard thickness 38 or 30 mm (1)

Deep folded closed corner, corrosion protected steel tray 0,5 mm thick (2)

Visible PVC edging visibl2 hot-melt pressure bonded and machined (3)
Factory bonded selected floor covering (4)

PERFORMANCES

Fire rating
The EUROBAC panel is rated M1 (in plenum) (PV Nr. 12211.05)

Electrostatic properties
Depending of the quality and nature of the covering, vary from 5 x 10⁵
to 2 x 10¹² ohms (according to norm NFP 62001)

Sound attenuation Dn (rose)
Varie from 41 to 44 dbA depending of the thickness of panel, the understructure and the floor covering.

COVERINGS

The EUROBAC panel can be supplied with the following coverings :

laminate, vinyl, linoleum, rubber, textile.

Point loads

EUROBAC 30.5

EUROBAC 38.5

Understructure

Covering

Stringerless

Lockable

Stringerless

Lockable

None or flexible

1A
(1B or 2C)

2A
(3B or 5C)

2A
(3B or 4C)

3A
(5B or 5C)

Laminate

1A
(2B or 3C)

2A
(4B or 5C)

3A
(4B or 4C)

3A
(5B or 5C)

Load classes according to norm NF EN 12825
Safety factor = 2

NB : A system classed 1A is a system which the ultimate load is at least 4 kN (load classe 1). The working load is at least 2 kN, with a safety factor of 2, for a deflection less than 2,5 mm (deflection class A).
See tables below for the other classes

Class

Deflection class

Maximum deflection

Load class

A (the more stringent)

2,5 mm

Class break

> 4 kN

> 6 kN

> 8 kN

> 9 kN

> 10 kN

> 12 kN

3 mm

Working class

> 2 kN

> 3 kN

> 4 kN

> 4,5 kN

> 5 kN

> 6 kN

C (the less stringent)

4 mm

Especially conceived to answer to particular requirements of technical applications and notably calculus centres, telephonic exchanges...

The technique

DESCRIPTION

PERFORMANCES

COVERINGS

DENCO TECHNOLOGIES - 104, rue Bellocier - BP 707 - 89107 SENS CEDEX - FRANCE

Phone : +33 386 95 66 66 - Fax : +33 386 95 42 12