Covering vinyl - SEC 800 : Technical range - Especially intended to technical premises using "plenum" as a ventilation area.

Especially intended to technical premises using "plenum" as a ventilation area.

The ventilation

DESCRIPTION

Composition
Nominal standard size 600 x 600 mm
Top steel plate with 2850 perforations dia. 6 mm (1) , providing a free cross sectional area of 800 cm².
Welded steel frame and reinforcements
The set is treated against the corrosion.
Visible Black PVC edge trim crimped to the top plate, 5 mm wide
Factory bonded selected floor covering.
Exists in 30 or 38 mm thick.

PERFORMANCES

Fire rating
The structure of SEC 800 panel is M0 by nature

Electrostatic properties
Depending of the quality and the conception of the covering, vary from 5 x 10⁵
to 2 x 10¹² ohms according to standard NFP 62001

Point loads

SEC 800.30 or 38

Understructure

Covering

Stringerless

Lockable

Laminate

3A (3B or 3C)

3A (5B or 5C)

Load classes according to norm NF EN 12825
Safety factor = 2

OPTIONS

To regulate the air flow :
a damper (adjustable without removing panel) consisting of two corrosion protected perforated steel sheets, one fixe, the other sliding.

COVERINGS

The SEC 800 panel can be supplied with the following coverings :
laminate, vinyl, linoleum (textile excluded)

NB : A system classed 1A is a system which the ultimate load is at least 4 kN (load classe 1). The working load is at least 2 kN, with a safety factor of 2, for a deflection less than 2,5 mm (deflection class A).
See tables below for the other classes

Class

Deflection class

Maximum deflection

Load class

A (the more stringent)

2,5 mm

Class break

> 4 kN

> 6 kN

> 8 kN

> 9 kN

> 10 kN

> 12 kN

3 mm

Working class

> 2 kN

> 3 kN

> 4 kN

> 4,5 kN

> 5 kN

> 6 kN

C (the less stringent)

4 mm